MissionLINK provides global terrestrial communications coverage, anywhere in the world. Unaffected by weather or landscape, it’s the solution to depend on for essential communications wherever your mission takes you, whether you operate as part of a deployed force or a single individual.
Magnetic mount for the Thales MissionLINK Iridium Certus antenna. Set of three hardware mounts with magnets. MG81-BPMAG is an ultra low profile mount for the Ligado MSAT-G2 antenna and Thales MissionLINK and Hughes BGAN C11 -Includes the MG-81 low profile mount and 3 x 3-inch magnets.
Easy to set up and use
High-speed satellite broadband on the Iridium Certus 700 network provided by Ground Control
100% Global, Low Latency satellite coverage for critical data and communications
Connects up to 12 wireless devices (laptops, smartphones, tablets) simultaneously
300 meter – 1,000′ feet WiFi range. Excellent for working at a distance
3 phone lines… 2 on the RJ-14 phone jack, and 1-3 for VoIP phones via Ethernet
Operates in extreme environments -30°C to +55°C / -22°F to +131°F
WPA2 wireless security with MAC address whitelisting
Internet domain whitelists and blacklists configurable from terminal
Location tracking services – Send coordinates to any server with any time-frequency
Internet Speeds: Up to 704kbps (Rx), 352kbps(Tx), 256kbps(Streaming)
Wifi: 802.11b/g, 300m / 1,000ft range
Environmental: (Terminal) IP31, (Antenna) IP66 – Excellent in all kinds of weather/dust
Warranty: Two years standard limited warranty. Extended warranties available
Antenna (white): Electronically steered phased array. Polarization is RHCP with a gain of 9.5 dBi. Beam width is 31 degrees typical per beam. View angle of MissionLINK antenna is from 8° up from the horizon to 90° overhead
Service Used: Iridium Certus On L-band
Wireless LAN: 802.11 b/g frequencies (802.11n is currently not supported)
Wireless Range: Tested at 300 meters (1,000 feet) with good wireless signal (-78 dBm signal) to standard laptop computer
LAN: 3 RJ-45 Ethernet Ports with PoE (Power over Ethernet Class 2)
WAN: Passthrough failover parameters set in the web interface
Phone: 3 phones lines – 2 are available on the RJ14 phone jack (with splitter), and all three are available to VoIP phones. Configuration of lines may be configured from the MissionLINK web interface
IO Port: GPIO (RS-232, +12V out, DISTRESS, Radio Gateway, GPIO)
External DC and AC Power: 10 to 32 volts DC (MIL-STD-1275D)
Power Consumption: System power consumption is 30 watts average with 60 watts maximum (during heavy upload transmission) – Tested
Operating Temperatures: -30°C to +55°C / -22°F to +131°F
Due to limited supply, the product is not available for purchase currently, please contact us.
Manage Cookie Consent
Functional Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.