SE300 Protective Case

Product Description

Its tough with Acuform foam or dividers will keep your camera, video, or high-cost equipment safe from impact, providing safe, secure protection from the elements. Built-in padlock holes give extra safety. Seahorse optional locking latches give added security and keep out prying hands.

SE300DT

Interior Dimensions: 9.2 x 7.1 x 4.1 in
Exterior Dimensions: 10.7 x 9.8 x 4.9 in
Weight Empty/Foam: 2.45/2.65 lb
Buoyancy: 10 lb
Weight Capacity: 30 lb
Meets airline ATA-300 specification
The automatic pressure equalization system
Padlock holes w/ metal hasp protectors (fits up to 3/8 shackle)
Optional multilayer protective cubed matrix Accuform Foam
Optional Keyed Locking Latches available in chrome metal or non-corrosive plastic
Panel mount drawings
Custom colors and machining are available

Watertight, Airtight, and Crush Resistant
Automatic Pressure Purge System: Seahorse’s Automatic Pressure Purge System guarantees a perfect seal by incorporating its own O-Ring under one of the latches. You will never forget to set the valve since it automatically activates when closing the case. Pressure is released as you open the latch.

Molded-In Padlock Holes: Each case has two molded-in padlock holes to secure your valuables. The padlock holes will accept “TSA” and most standard padlocks.

Accuform Foam: Optional multilayer protective pre-scored cubed foam. Accuform Foam in Seahorse cases consists of a layer of egg crate foam in the lid, a thick cubed foam center, and a 1/2″ thick high-density shock absorbing foam bottom layer.

Waterproof Panel Kit: The Seahorse Panel Kits are used when specific equipment needs to be kept protected even when the case is open. These two plates are made of .063″ brushed aluminum and include screws, one perimeter gasket and O-Rings for the screws to waterproof the bottom portion of your case.

Keyed Locks: Available with latches with keyed chrome metal locks or plastic non-corrosive locks.
Metal locks are made entirely of chromed steel and keyed.
Plastics locks are molded of ABS Resin, one of the toughest co-polymers available. Keys are also made of Plastic.
Made in the U.S.A.
Lifetime Guarantee*: SEAHORSE CASES are guaranteed against defects in materials and craftsmanship for the life of the case. Cases that have been modified are not covered by this guarantee.
DIMENSIONS AND WEIGHTS

Exterior: 10.7 x 9.8 x 4.9″ (27.43 x 25.02 x 12.37cm)
Interior: 9.2 x 7.1 x 4.1” (24.13 x 18.67 x 10.41cm)
Weight:
2.65 lbs. (1.20 kg) with foam
2.45 lbs. (1.12kg) Empty
Shipping Weight: Approx. 4 lbs. (1.82 kg)
AVAILABLE COLORS:

Black
Gunmetal Grey
Yellow
Orange
Desert Tan
Interested in a Custom Color? Contact us for a custom quote.

Our goal is to provide each customer the perfect case solution. Contact us or give us a call at 619-660-2300 to discuss your case needs.

CERTIFICATIONS

MIL-STD810F 512.4
IP67
MSDS Available upon request
Drop Testing Certification

SEAHORSE CASES LIFETIME WARRANTY

Seahorse Cases are guaranteed against defects in materials and craftsmanship for the life of the case. Cases that have been modified are not covered under this guarantee. The case is guaranteed to be watertight when properly closed with an undamaged O-ring in place. Any liability, either expressed or implied, is limited to the replacement of the case and not its contents. This guarantee is void if the Seahorse Case has seen excessive abuse or blatant neglect beyond normal and sensible wear and tear. To inquire about a replacement or more information, please contact our Customer Service department at (626) 339-6673