Capable of conditioning and rapid charging Iridium 9555 batteries in the same unit; in a single process without ever draining the battery. Charge at current rates recommended by the battery manufacturer. Be suitable to operate in the office (AC) as well as in the vehicle (DC). Switch to maintenance mode once the battery is fully charged. In the maintenance mode the battery is kept at peak conditions for as long as it is left on the unit with out overheating or overcharging.
You can charge the standard Iridium 9555 batteries and the Iridium 9555 High Capacity batteries also.
-Dimensions: 6” x 3.75” x 1.25”
-Weight: 8 oz. ±5%
-Operating Temperature: -20° C to +50° C
-Storage Temperature: -10° C to +70° C
-Relative Humidity: 95% maximum non condensing
-Input Plug: 2.5 mm center positive socket
-Input Electrical (to charger): 12V DC ±20% 800 mAh ±10%
-Switching Power Circuit: On board to minimize heat generation
-Charging System (battery alone): High current charge with regularly spaced negative pulses
-Charging Chemistries: Indistinctively charges Ni-Cd and/or NiMH Batteries
-Dual Power Source AC-DC: operate indistictively from AC and/or DC
-Transformer power: input 120V AC 60 HZ 15 Watts, output 12V DC 800 mAh
-Cord, 6 ft 22 AWG x 2C, 90C