Hughes 9502 BGAN M2M External Antenna Terminal

Product Description

The Hughes 9502 BGAN M2M External Antenna Terminal is designed to work over the Inmarsat Broadband Global Area Network (BGAN) for IP SCADA and machine-to-machine (M2M) applications making it a great fit for enabling environmental, pipeline, or compressor monitoring, SmartGrid, well site automation, or video surveillance.

The 9502 M2M terminal delivers affordable, global, end-to-end IP data connectivity, even to power-challenged regions that rely solely upon solar-battery arrays with sensitive power budgets.  In fact, one of the most impressive features of the 9502 it’s exceptionally low power consumption (1W idle).

The terminal comes with 32 feet of RF cabling, allowing the user to position the antenna away from the transceiver, which could remain in a secure location to better protect your property from unauthorized use or theft.

Features

• Utilizes BGAN or M2M SIM cards
• “Always-on” connectivity means no manual intervention is needed to recover from an outage
• Auto-on/auto-context activation automatically restores power and PDP connection following loss of power or IP connection
• Remote control with SMS—remote control of the terminal, including configuration, debugging, and access to Web interface
• Ultra-low power consumption
  • -Transmit: < 20W
  • -Narrow beam w/o transmit: 3W
  • -Idle (regional beam): 1W
  • -Off (wake on packet): < 10mW (@ 12Vdc)
  • -Off (wake on packet): < 30mW (@ 24Vdc)
  • -Off (GPIO control): 0 W
• Relay mode passes WAN IP address to the connected RTU
• Supports Port Forwarding
• Security enhancements with extended layers of embedded security options
• Basic installation; no PC required
• Outdoor unit (ODU) can be pole mounted
• Indoor unit (IDU) is housed inside building or the remote terminal unit (RTU)
• Built-in GPS receiver

 Interfaces

• Ethernet connection (RJ45)
• USB–Type B for connection to configuration PC
• RS-232 (DB9) to external NMEA 0183-based GNSS device (e.g., GLONASS receiver)
• TNC connection on the IDU to the external antenna

 Package Contents

• Hughes 9502 BGAN M2M Terminal IDU
• 10 meters RF antenna cable. Note: If cable length is changed, the cable loss needs to be 1.8 dB +/- 0.5 dB when measured at 1.6 GHz end-to-end which includes connectors
• External antenna (ODU)